Yuhui Heavy Industry Sand Making Machine.Roller Skin

In the sand making industry, the importance of roller skin is self-evident. A good roller skin can not only improve sand making efficiency, but also effectively reduce maintenance costs. Today, let's take a look at the "tough guy" in the sand making machine - the thickened wear-resistant roller skin.

High manganese alloy material, thickened design:

This roller skin is made of thickened and wear-resistant high manganese alloy material, which has extremely high hardness and wear resistance. In actual use, the roller skin wears slowly and has a long service life, up to 3 years! This undoubtedly provides a strong guarantee for the long-term stable operation of the sand making machine.

Medium pressure lamination crushing method to reduce wear:

In addition to using high manganese alloy materials, the roller skin is also equipped with a medium-pressure lamination crushing method. This method can greatly reduce the wear of the roller skin, improve the crushing efficiency, and enable the sand making machine to maintain efficient performance after long-term operation.

A variety of stones can be broken and the particle size can be adjusted:

The maximum feed particle size of the sand making machine is below 4-5cm, and the discharge particle size is normally between 1-5mm, which can be adjusted at will to control the particle size. In this way, a variety of stones can be crushed to meet the needs of different customers.